Filter
Top Products
25
2. Multi-screen Display and Sequencing
2.1. Screen Display.
Select any camera for Full screen display by pressing the Number button of the
desired camera.
2.2. Multi-screen Display and Switch Sequencing Display.
1) Press [DISPLAY] buttons to activate the multiscreen display. It is changed the
order as shown below among your choice of SPLIT MODE.
2) To start Auto Sequence, press [DISPLAY] buttons for 2 seconds to begin full
screen sequencing.
3) The sequence mode and dwell times are programmable. For detailed information
about configuring those, see “Switch Setup”. If the sequence mode is not
activated, it moves to Quad mode instead of Sequencing.