Filter
Top Products
82
<Note> EVENT RECORD is set by default and makes the TIME SEARCH
CHART display EVENT recording in Red as above FIGURE 1.
2.4 Event Source Search
Event source search feature allows you to search the recording data for ALARM,
MOTION and VLOSS events previously triggered on the DVR.
1. Press [+/-] button to select “Event Source” in search mode.
And select the event source (Alarm, Motion, Vloss) which you want to search.
1) ALARM: Select Alarm Input 1~4.
2) MOTION: Select the channel 1~16.
3) VLOSS (Video Loss): Select the channel 1~16.
4) SYSTEM:
Inactivated
2. Users can have multiple selections by pressing icon, as shown below.