Filter
Top Products
59
5. Log: This DVR will mail Log List at selected intervals.
6. Attach Picture: While in recording mode, a picture can be attached to mail.
7. E-mail Address: 5 mail addresses can be configured for mail notification.
6.4. SMTP
This menu is activated when you check <SMPT> on EMAIL.
The following settings are only needed if you are NOT using the DVR mail server.
1. Server: Enter the e-mail server name or IP address. To set server name, use the
virtual keyboard, or press the appropriate numeric button on IR Remote or front panel.
2. Port: Define the port the SMTP server will communicate through. By default, it is set
to 25.
3. Authentication: Check this <ON> if your mail server requires authentication.
4. User ID & Password: Enter the user ID/name and password for the SMTP Server.
(It is recognised as Lower Case, even though it’s displayed in Upper Case).
5. Send Test: Test to send e-mail.
6. Save changes and exit the menu, press the [MENU] button.
Exit the menu without making changes, press the [CANCEL] button.