Filter
Top Products
27
4. Zooming
During live view mode, it is possible to zoom into a section of the screen to get a close-up
view of the screen.
1. To activate the digital zoom, select the full screen display of the camera you wish to
zoom.
2. Then press the [ZOOM] button on IR Remote controller. Zoom area box pops up, as
shown below: x2
3. Move the box to the desired position using Direction [ ] buttons.
4. Press [CANCEL] button to return normal mode.
<Note>
This function is limited while it’s playback in this model.
If the Zoom button is pressed while in a multiscreen display, zoom operation is not
activated.
x 2