Filter
Top Products
77
2.1 Tour Group
A preset Tour Group allows a camera to move through a programmed sequence of
PTZ presets.
1) Communication settings.
:Configure appropriate model and then enter the corresponding baud rate, PTZ ID
(address). Please refer to the PTZ manufacturer’s instruction manual for proper
jumper settings to match the protocol settings to the DVR.
2) Tour: There are 4 programmable Tours. Use the [-, +] buttons to change the values
[Group 1 Group 2 Group 3 Group 4]
3) There is sub menu of each Tour group. The menus are displayed with options in the
left-hand column and settings in the right hand column.
a. Group List: Each Tour Group can consist of up to 10 preset positions.
b. Preset no. : Enter the start preset no and stop preset.
c. Dwell Time: Set the pause between end of current preset and the start of the next
preset.
d. Change: Add, modify or clear the Tour list using this option.
f. Repeat the procedure in step b to d to add Tour list.