Genie GDVRH-608 DVR User Manual


 
64
7. DEVICE
7.1. GENERAL
This DVR support 4/8/16 channel Audio, Alarm Inputs, 4 x Relay Outputs and
supports HDMI output.
1. The menus are displayed with options in the left-hand column and settings in the right
hand column. A cursor (highlighted menu) can be moved using the directional buttons
[].
1) DISPLAY : Please decide output video resolution
It can be set to the correct video resolution on the monitor.
[800*600
1024*768
1280*720
1280*1024
1600*1200
1680*1050
1920*1080I
1920*1080P ]
HDMI AUTO
Automatically detects and sets the HDMI resolution on the monitor connected to the
DVR. It might display “no video” if a VGA monitor is not able to support high
resolution.
<NOTE>
In order to connect HDMI and VGA output to use both monitors, please set up as the
lowest resolution without selecting HDMI AUTO.
2) Audio Record: Select audio recording device use: ON or OFF.
The audio data is always recorded in real time unlike the video data, which can be
recorded in various modes, including real time. There may be a slight delay in
synchronisation of the audio to video
3) Keypad Model: Select Joystick Controller and Baud Rate.
4) Extend Device: Select a model of POS/ATM.
5) PTZ Event: DURATON [OFF,1SEC ~ 5 SEC]: Select PTZ EVENT duration.
6) Alarm Out: DURATON [OFF,1SEC ~ 5 SEC]: Select Alarm duration.