Filter
Top Products
76
5) To escape from PTZ mode, press the ESC button on the PTZ controller. Or click
right button, outside the control box, to return to the virtual remote controller. Then
click the ESC button.
2. Preset & Tour
Button Function
Set preset position; SPOT OUT on remote controller
Move the PTZ into the desired location.
Press the Preset button.
Custom 1 illuminates.
Set the # for the Preset location.
Press Enter to save and exit.
Go to preset position; INFO on remote controller
Press Go to button.
Enter the desired Preset # and press Enter.
Start Auto Tour; BACKUP on remote controller
Press Auto Tour Button.
Press the + button and enter the range of Preset and press Enter.