Filter
Top Products
43
Basic Setup Getting
Started
DVD
Recording
DVD
Playback
Advanced
Settings
Help
Ratings
Enables a password-protected rating system to block playback of
discs with objectionable material:
• Use the / buttons to select Ratings and press Play /Enter.
• Enter a 5-digit password and press Play /Enter. NOTE: If this is
the first time you have used the player, you must enter the original
factory password (“99999”), before you can enter your own per-
sonal password.
• Store your password in a safe place so you can recall it later.
• You will be prompted to enter your password again to confirm.
• Use the / buttons to select the desired rating (from 1-Kids
Safe to 8-Adult).
• Press Play /Enter to confirm your selection.
Password
Sets or changes the password for the Ratings feature:
• Use the / buttons to select Password and press Play /Enter.
• Enter a 5-digit password and press Play /Enter. NOTE: If this is
the first time you have used the player, you must enter the original
factory password (“99999”), before you can enter your own per-
sonal password.
• Store your password in a safe place so you can recall it later.
• You will be prompted to enter your password again to confirm.
Screen Saver
Enables or disables Screen Saver:
• Use the / buttons to select Screen Saver and press Play /
Enter.
• Use the / buttons to select On or Off.
• If you select On, the DVD+RW icon will appear whenever the
unit is left alone for several minutes to protect your TV screen.
Angle Mark
Enables or disables Angle Marks during DVD playback:
• Use the / buttons to select Angle Mark and press Play /
Enter.
• Use the / buttons to select On or Off.
• If you select On, a camera icon will appear on screen whenever an
alternative angle is available during DVD playback.
Factory Reset
Resets all Setup menu options to their original settings.
• Use the / buttons to select Factory Reset.
•Use the
/ buttons to select Confirm or Cancel. If you select
Confirm all custom settings will be lost and the DVD Recorder
will restart in Initial Setup mode, see page 14.
:: Disc Media Settings
Use to finalize a DVD+R disc or erase a DVD+RW disc. Only avail-
able when a DVD+R/+RW is loaded.
1 Press Setup.
2 Use the / buttons to select Disc Media and press Play /
Enter.
3 Choose from the following:
Disc Media Menu