Filter
Top Products
-30-
Model G0747/G0748 (Mfg. Since 8/12)
Tilting Head Forward/Backward
1. DISCONNECT MILL FROM POWER!
2. Loosen the three tilt lock bolts shown in
Figure 22.
Figure 22. Head tilt controls.
Lock
Bolts
Tilt Bolt
3. Use one hand to apply pressure to the head
in the direction of tilt, then slowly rotate the
tilt bolt. Rotating this bolt clockwise will tilt the
head backward.
4. Re-tighten the lock bolts.
Rotating Head Left/Right
1. DISCONNECT MILL FROM POWER!
2. Loosen the four lock bolts shown in Figure 23.
The head is heavy. When tilting or rotating
the head, get help to support the weight as
you use the controls.
3. Use one hand to apply pressure to the head
in the direction of rotation, then slowly turn
the rotation bolt.
4. Re-tighten the lock bolts.
Always lock the head firmly in place after
tilting or rotating it. Unexpected movement
of the head during operations could cause
damage to the cutter or workpiece.
Figure 23. Head rotation controls.
Rotation Bolt
Lock Bolts