Filter
Top Products
Model G0747/G0748 (Mfg. Since 8/12)
-41-
SECTION 5: ACCESSORIES
ACCESSORIES
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
order online at www.grizzly.com or call 1-800-523-4777
G1076—52-PC. Clamping Kit
This clamping kit includes 24 studs, six step block
pairs, six T-nuts, six flange nuts, four coupling
nuts, and six end hold-downs. The rack is slotted
so it can be mounted close to the machine for
easy access.
Figure 45. G1076 52-PC. Clamping Kit.
H6089—2 Axis Digital Read Out
(12" x 30")
H6093—3 Axis Digital Read Out
(12" x 30" x 5")
H7850—3 Axis Digital Read Out
(12" x 30" x 16
3
⁄4")
You will be amazed the list of features for these
DROs that include: selectable resolution down to
5µm, absolute/incremental coordinate display, arc
function, line of holes function, angled cuts func-
tion, 199 user defined datum points, centering/
cutter offset, double sealed scales, inches/mil-
limeters, calculator with trig functions, and linear
error compensation.
Figure 46. 3 Axis Digital Read Out.
G5641—1-2-3 Blocks
G9815—Parallel Set
H5556—Edge Finder Set
Figure 43. G5641 1-2-3 Blocks, G9815 Parallel
Set, and H5556 Edge Finder Set.
G5641
G9815
H5556
G9760—20-PC. 2 & 4 Flute TiN End Mill Set.
Includes these sizes and styles in two and four
flute styles:
3
/16",
1
/4",
5
/16",
3
/8",
7
/16",
1
/2",
9
/16",
5
/8",
3
/8",
11
/16", and
3
/4".
Figure 44. G9760 20-PC End Mill Set.