Filter
Top Products
Model G0747/G0748 (Mfg. Since 8/12)
-3-
INTRODUCTION
These milling machines are designed to remove
material from a metal workpiece that is secured
to the work table or a mill vise. The cutting tool
is fixed to the rotating spindle and moved into the
workpiece by lowering the spindle or moving the
table. The table moves in three axes (X-, Y-, and
Z-axis) with a power feed assist for the X-axis.
Spindle downfeed options are rapid (coarse)
control or slow (fine) control with adjustable auto-
downfeed controls.
Both models offer a wide range of spindle speeds
and three auto-downfeed rates.
The wide range of cutting tools and optional
equipment available, combined with the flexible
features of these milling machines, make possible
countless metalworking operations.
Machine Description
We are proud to provide a high-quality owner’s
manual with your new machine!
We
made every effort to be exact with the
instruc-
tions, specifications, drawings, and photographs
contained inside. Sometimes we make mistakes,
but
our policy of continuous improvement
also
means that
sometimes the machine
you receive
will be slightly different than what is shown in
the manual
.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused about a procedure
, check our website
for an updated version. W
e post current
manuals
and
manual updates for free on our website at
www.grizzly.com
.
Alternatively, you can call our Technical Support
for help. Before calling, please write down the
Manufacture Date
and Serial Number
stamped
into the machine ID label (see below). This infor-
mation helps us determine if updated documenta-
tion is available for your machine.
Manufacture Date
Serial Number
Manual Accuracy
We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Contact Info