Filter
Top Products
Installation and Connections
16
Please follow the instructions below to install the hard disk.
1. Loosen the screws and remove the
the upper cover.
2. Line up the HDD to the four holes of
the HDD bracket.
3. Use four screws to fix HDD.
4. Unfasten the HDD power cable.
5. Use the SATA data cable to connect
the HDD and SATA port.
6. Insert the HDD power cable. Close
the chassis and fix the screws to secure
firmly.
After completing HDD installation, please check the connection of the data
ribbon and power cord, and remount the upper cover with screws fastened.
Note
Power supply must be cut off before HDD installation or
replacement