Filter
Top Products
Honeywell
55
Activate Patrol (tour)
In Figure 4-30, input the patrol (tour) number in the No. blank and click the
patrol button.
Pattern Setup
In Figure 4-30, click Pattern and then click “begin. The interface is shown
as in Figure 4-34. Then you can go to Figure 4-29 to modify zoom, focus,
and iri
s.
Go back to Figure 4-34 and click End. You can m
emorize all these
operations as pattern 1.
Figure 4-34 Pattern Setup
Activate Pattern Function
In Figure 4-31, input a mode value in the “No.” field, and click Pattern.
Auto Scan Setup
In Figure 4-30, click Border. The interface is shown in Figure 4-27.
Please go to Figure 4-29, use direction arrows to select camera left limit.
Then ple
ase go to Figure 4-35 and click left limit button
Rep
eat the above procedures to set right limit.