Filter
Top Products
Overview of Navigation and Controls
36
Figure 4-12 Schedule Menu
Quick Setup
This function allows you to copy one channel setup to another. After setting
one channel, you can click the Copy button and switch to another channel
and then click the Paste button. You can finish setting one channel and
click the Save button to keep the setting of that channel, or you can finish
the entire setup and then click the Save button to keep all of the modified
settings.
Redundancy
Redundancy function allows you to save record file in several hard disks.
When a record is damage in one disk, there is a spare one in the other disk,
so that data reliability and safety is maintained.
In
Main menu > Advanced > HDD Management, set one or more disk(s)
as redundant from dropdown list. System automatically overwrites old files
once hard disk is full.
Note
At least one read-write disk is required for DVR to record
video.
In Main menu > Setting > Schedule, check the Redundancy box to
enable this function in the selected channel.
If current channel is not recording, the setup gets activated when the
channel begin recording the next time.