Filter
Top Products
Honeywell
35
Schedule
After the system has booted up it will enter a default 24-hour regular mode.
You can set the record type and time in schedule interface.
Schedule Menu
In the main menu, from Setting to Schedule, you can go to the schedule
menu. See Figure 4-12.
Channel: Please select the channel number first. You can select “all” if
you want to set for all of the channels.
Week day: There are eight options ranging from Saturday to Sunday
and the entire week.
Pre-record: System can pre-record the video before the event triggers
recording. The value ranges from 1 to 30 seconds. But the actual pre-
record length depends on total channel number with pre-record
enabled and the bit rate of video stream. When pre-record is enabled in
all channels, actual pre-record length of each channel can be no less
than 4 seconds.
Redundancy: save
the record of the selected channel in two hard
disks.
Please refer to Redundancy for more details.
Record types: There are three types: regular, motion detection (MD)
and alarm.
Please check a box to select the corresponding function. After completing
all the setups please click the Save button; the system will return to the
previous menu.
At the bottom of the menu, there are color bars for your reference. Green
color stands for regular recording, yellow color stands for motion detection
and red color stands for alarm recording.