Filter
Top Products
Honeywell
53
Auto pan
Figure 4-31 Function Menu
Note
Preset, tour and pattern all need the value to be the
control parameter. You can define it according to the
speed dome’s user manual.
You need to refer to your speed dome user’s manual for
the auxiliary function definition. In some cases, it can be
used for special processes.
The following setups are usually performed in the
interfaces shown in Figure 4-29, Figure 4-30 and Figure
4-31.
Preset Setup
In Figure 4-29, use eight direction arrows to adjust the camera to the proper
position.
In Figure 4-30, click Prese
t and input the preset number. Clicking Set will
save the preset.
Now you can add this preset to one tour.