Filter
Top Products
Honeywell
65
DHCP: It is to activate auto search IP. When you enable the DHCP
function, you cannot modify the IP/Subnet mask /Gateway. These
values are from the DHCP function. If you have not enabled the DHCP
function, IP/Subnet mask/Gateway will display as zero. You need to
disable the DHCP function to view current IP information. When PPPOE
is operating, you cannot modify IP/Subnet mask /Gateway.
TCP port: Default value is 37777.
UDP port: Default value is 37778.
HTTP port: Default value is 80.
Max connection: system support maximal 10 users. 0 means there is no
connection limit.
Transfer mode: Here you can select the priority between fluency/video
quality.
Network download: System can process the downloaded data first if you
enable this function.
After completing all the settings, click Save, and the system will return to
the previous menu.
Figure 5-8 Network Setup Menu
Advanced Setup
Advanced setup interface is shown in Figure 5-9. Draw a circle to enable
the corresponding function and then double-click the current item to go to
the setup interface.