Filter
Top Products
Overview of Navigation and Controls
46
Detect Device
Click Backup, and you can see an interface shown in Figure 4-24. Here
you can view device information.
You can view the backup device name and its total space and free space.
The device includes a USB burner, flash disk, SD card and portable HDD.
Note
The USB Flash Disk models listed in Appendix B are
strongly recommended, models from other brands may not
be fully compatible.
Figure 4-24 Device Detection Menu of Backup
Backup
Select backup device and then set the channel, file start time and end time.
Click Add. The system will begin searching. All matched files are listed
below. The system automatically calculates the remaining capacity and
capacity needed. See Figure 4-25.
The sy
stem only backs up the files with a √ before the channel name. You
can click Fn or Cancel to delete √ after file serial number.
Click Start, and you can back up the selected files. There is a process bar
for your reference.