Honeywell HREP8 DVR User Manual


 
20
Introduction
BACKUP: Recorded footage (including audio) can be archived to a USB memory stick or
to a CD/DVD.
Playback software is embedded with the backup files and the backup also contains the
system event log and backup log for full traceability.
REMOTE CONNECTION: Web connection allows simultaneous connection for up to four
remote users per DVR. Depending on the user level, full DVR control is available over the
internet as well as the ability to remotely configure the DVR.
Alarm outputs on the DVR can be remotely triggered over the internet.
COMPREHENSIVE RECORDING SETUP: Recording can be scheduled, alarm, or
motion activated. For each type of recording, frame rates, image quality, and audio
recording properties can be adjusted per hour, day, and for each individual channel.
The DVR also has a panic recording feature (from the front panel or external input) which
overrides all other recording settings to provide the best quality recording in the event of an
emergency.
PTZ CONTROL: Full PTZ control is available from the front panel or remote connection
and a wide number of speed dome protocols are supported. Protocols can be set
individually for each channel and PTZ speed can be adjusted to suit particular speed
domes.
TELEMETRY CONTROL: Full telemetry control is available from the front panel or remote
connection and a wide number of speed dome protocols are supported. Protocols can be
set individually for each channel and telemetry speed can be adjusted to suit particular
speed domes.
EXTENSIVE MONITOR SUPPORT: The DVR has two main monitor outputs (Composite
and DVI). One spot monitor output can be programmed in the DVR setup.
LIVE DISPLAY: The DVR displays single or multi screen images and also has several
sequence modes (standard and user definable).