Filter
Top Products
Configuration
Document 800-00918 Rev F 51
02/08
Setting up the Network
Highlight Network in the Network menu and press . The Network setup screen
displays. In the Network Setup screen, you are able to change the Network, LAN,
Modem, and DVRNS settings.
Figure 3-23 Network Setup Screen
Configuring the Network
1. Highlight the first field beside Transfer Speed. Press the Up and Down arrows to
set the Transfer Speed from 50 Kbps to 100 Mbps.
2. Highlight the second field beside Transfer Speed. You can select the unit of
measure for the transfer speed between: bps and ips. Press to set the unit of
measure.
3. Highlight the field beside Quality and press . You can select the Quality from:
Very High, High, Standard, and Basic.
4. Press to set the Quality.
Note The higher Quality settings require higher Transfer Speed
settings. The transfer speed you set is the maximum speed.
Depending on the network environment, this speed may not be
achieved.
Note The local recording speed might be affected by various network
bandwidth (Transfer Speed) conditions.