Honeywell HRSD16 DVR User Manual


 
Configuration
Document 800-00918 Rev F 81
02/08
Motion Detection Setup
Your DVR has built-in video motion detection. In the Settings tab, you can:
adjust the sensitivity of the motion detection
change the number of motion detection blocks
watch how the DVR reacts to motion
define the motion detection area
set the daytime and nighttime ranges
turn motion detection On and Off for each camera
In the Motion Detection Actions 1 tab, you can choose the cameras, the Alarm-Out
output connectors, and the notification actions for each Alarm-In input connectors.
In the Motion Detection Actions 2 tab, you can choose PTZ camera preset positions
and spot monitor actions.
Motion Detection Settings Tab
Highlight Motion Detection in the Event menu and press . The Motion Detection
setup screen appears.
Figure 3-55 Motion Detection Settings Screen
Adjusting the Sensitivity of the Motion Detection
You can independently adjust how sensitive the DVR is to motion for Daytime and
Nighttime.
1. Highlight the field under the Sensitivity heading in the Motion Detection Settings
screen and press . The Motion Detection Sensitivity screen appears.