Filter
Top Products
10
Quick Start Guide
Connecting the Network
ݢConnecting to the LAN;
$POOFDUPOFFOEPGUIF&UIFSOFUDBCMFUPUIFQSPEVDUBOEUIFPUIFSFOEUPUIF-"/SPVUFS
ݣConnecting to the Wi-Fi (Wireless LAN);
1. Power o the receiver and disconnect the
Ethernet cable.
2. Insert the HUMAX Wi-Fi dongle into an USB
port and power on the receiver.
3. Go to MENU > Settings > System > Internet
Setting > Congure Wi-Fi.
Note: If Congure Wi-Fi is disabled, make sure
that the Ethernet cable is disconnected
and check if the HUMAX Wi-Fi dongle is
inserted correctly into an USB port on the
receiver.
4. Select Network Name and press the OK
button. The list of all available Wi-Fi Networks
detected will appear. Select the Network you
want to connect to and press the OK button.
5. Select the Security Type of your Wi-Fi router.
If you do not know the security type, do not
change this option. (Default: WPA-PSK(TKIP))