Humax HDR-7500T DVR User Manual


  Open as PDF
of 116
 
English
Menu On/O Select Conrm &OUFS_
57
Installation
Regular Update
You can set the software update to take place automatically at 4a.m. on a daily basis.
1. Select Regular Update.
2. Select an option.
hOn: Software is updated automatically at 4a.m.
hO: No automatic software update
Note:
t *UNBZUBLFBQQSPYJNBUFMZNJOVUFTUP
update software.
t 0UIFSGVODUJPOTTVDIBTTDIFEVMJOH
programmes will not activate while software
update takes place.
t *GOFXTPGUXBSFJTEFUFDUFEZPVDBODIPPTF
either to download immediately or later. If you select Later, the message will be displayed again when
you switch into standby mode.
t :PVDBOBMTPVQEBUFUIFTPGUXBSFCZDPOOFDUJOHB64#EFWJDFXIJDIIBTUIFOFXTPGUXBSFöMF5IFöMF
can be downloaded from the HUMAX website.
Caution:
t 1MFBTFCFDBSFGVMUPLFFQUIFQPXFSPOBOEUIFQPXFSDPSEQMVHHFEJOEVSJOHTPGUXBSFVQEBUF*GUIF
power is o during software update, fatal damage may be caused to the product.
t 4PGUXBSFVQEBUFUISPVHIUIFOFUXPSLJTBMTPQPTTJCMFJGZPVBDDFTT)6."9571PSUBM
Software Upgrade via USB Memory Stick
1. Visit HUMAX Australia website (www.humaxdigital.com/au) and go to Support>Software Download.
2. Check the latest software version and click the title to commence download and save it to an EMPTY
USB memory stick (Make sure you have no other les).
3. Power o the receiver by switching o the switch located on the rear.
4. Insert the USB memory stick into the USB port (located at the rear) of the receiver.
5. Power on the receiver by switching on the switch located on the rear and immediately start tapping
the front Standby touch button until the letter R appears on the front display.
6. The front display will change to P and numbers will show indicating the progress. (You can also
monitor the progress on the TV screen connected to the receiver.)
7. When the front display changes to END, pull out the USB memory stick.
8. To conrm successful update, please go to Menu>System>System Information and check Software
Version.
Note: If the download progress stops around 89%, it may take up to 5 minutes for it to restart. DO NOT
TURN OFF the receiver at this point.
 previous next