Filter
Top Products
20
NS-19LD120A13 Insignia 19" LCD TV/DVD Combo
www.insigniaproducts.com
11 Press S or T to highlight Antenna, Cable, or
Satellite Box (if your cable TV using a box,
select Satellite Box), then press ENTER
/ .
A If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
During scanning, your TV searches for
digital channels first. When the digital
channel search is complete, a message
appears asking if you want to search for
analog channels. Select YES to continue
searching for analog channels, or select
NO to stop searching for channels.
B If you select Cable, a message asks if you
have a cable box.
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
• Select Ye s , then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV:
• Select AV, Component, or HDMI, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan.
C If you select Satellite Box, a message asks
how you connected the satellite box to
your TV:
• Select AV, Component, or HDMI, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan.
12 To watch TV, press INPUT, press
S or T to
highlight TV or the video input source you
connected your cable or satellite box to in the
Input Source list, then press ENTER
/ .
• If your TV/DVD combo is connected to an
antenna, cable TV (no box), or cable or satellite
TV box using a coaxial cable, select TV.
• If your TV/DVD combo is connected to a cable
or satellite box using an HDMI cable or HDMI
cable with a DVI adapter, select HDMI.
• If your TV/DVD combo is connected to a cable
or satellite box using a component video
cable, select Component.
• If your TV/DVD combo is connected to a cable
or satellite box using a composite video cable,
select A/V.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Scanning for Channels
Analog Channels: 0
Digital Channels: 0
15%
Do you have a Cable Box?
No
Yes
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Select
Channel scan may take 20+ minutes
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Select
cable box to the TV?
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Select
satellite box to the TV?
NS-19LD120A13_11-1329_MAN_V1_ENG.book Page 20 Friday, April 20, 2012 3:10 PM