Filter
Top Products
10
NS-19LD120A13 Insignia 19" LCD TV/DVD Combo
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1 Make sure that your TV/DVD combo’s power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the HDMI
jack on the side of your TV/DVD combo.
5 Connect a 3.5mm audio cable (not provided) to
the VGA/DVI IN jack on the side of your TV/DVD
combo and to the AUDIO OUT jacks on the
cable or satellite box.
6 Plug your TV/DVD combo’s power cord into a
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite box.
7 Go through the Setup Wizard on page 19
.
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV/DVD combo’s power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT IN Y/P
B/PR
video jacks on the back of your TV/DVD combo
and the component video out jacks on the cable
or satellite box.
4 Connect an audio cable (not provided) to the
L and R audio jacks on the side of your TV/DVD
combo and to the audio out jacks on the cable
or satellite TV box.
5 Plug your TV/DVD combo’s power cord into a
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite box.
6 Go through the Setup Wizard on page 19
.
Note
When you connect the audio using the VGA/DVI IN
jack, the audio output is analog.
Cable or satellite box
HDMI cable with HDMI-DVI adapter
Audio cable
Side of TV
Note
•The COMPONENT IN video jacks share the
audio jacks with the VIDEO IN/AV video jack.
• When you connect the audio using the L and R
audio jacks, the audio output is analog.
Audio cable
Cable or satellite box
Cables are often
color-coded to match
color-coded jacks.
Component video cable
Back of TV
NS-19LD120A13_11-1329_MAN_V1_ENG.book Page 10 Friday, April 20, 2012 3:10 PM