Filter
Top Products
4
NS-19LD120A13 Insignia 19" LCD TV/DVD Combo
www.insigniaproducts.com
Insignia 19" LCD TV/DVD Combo
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-19LD120A13 represents
the state of the art in LCD TV/DVD combo design
and is designed for reliable and trouble-free
performance.
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the stand to the screen with the two
provided screws.
Installing a wall-mount bracket
To attach your TV/DVD combo to a wall-mount
bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 If the stand is attached, remove the two screws
that secure the stand to the TV screen, then
remove the stand.
3 Attach the wall-mount bracket to your
TV/DVD combo using the mounting holes on
the back of your TV/DVD combo. See the
instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV/DVD combo.
Notes
• If you plan to wall-mount your TV/DVD combo,
do not install the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Screw type Screw length # of screws
M4 18 mm 2
Warning
This TV/DVD combo is intended to be supported by a
UL Listed wall mount bracket with suitable
weight/load. (See “Miscellaneous
” on page 46.)
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your
TV/DVD combo take type M4 screws.
3.94 in. (100 mm)
3.94 in. (100 mm)
Wall-mount brackets
NS-19LD120A13_11-1329_MAN_V1_ENG.book Page 4 Friday, April 20, 2012 3:10 PM