Filter
Top Products
25
Insignia 24" LCD TV/DVD Combo
www.insigniaproducts.com
• Advanced Audio—Opens the
Audio-Advanced Audio menu where you can
adjust additional audio options.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV
audio. You can select On (default setting)
to play audio through TV speakers, or
select Off to play audio through the
speakers on an external audio system.
• Digital Audio/SPDIF—Sends digital audio
to an external audio system. You can select
PCM (to output audio in 2-channel stereo),
or RAW (to pass through the original
digital audio sound).
• MTS/SAP—(Analog channels only) Selects
the audio mode. You can select:
• MONO—Select this option if there is
noise or static on weak stereo
broadcasts.
• STEREO—Select this option for
programs broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Reset Audio Settings—Resets all audio
settings to factory defaults.
4 Press
or to adjust the option, or press or
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Playing TV audio only
You can turn off the picture on your TV/DVD combo
and listen to the program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
2 Press
or to highlight CHANNELS, then press
or OK. The Channels menu opens.
3 Press
or to highlight Audio Only, then
press OK.
4 Press
or to select On.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Changing channel settings
Automatically scanning for channels
When you scan for channels, your TV/DVD combo
searches for channels with signals and stores the
channel information in the channel list. When you
press CH or CH , your TV/DVD combo goes to
the next or previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
Note
You can also press MTS/SAP on the
remote control one or more times to
select the audio mode.
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Select
Audio.Advanced Audio
Adjust low frequency sound
PICTURE
CHANNELS
SETTINGS
PHOTOS
AUDIO
TV Speakers On
Notes
• Audio Only works only when the input source is
TV, and your TV/DVD combo is receiving a
broadcast signal.
• To exit audio only mode, press any button.
When you exit audio only mode, the Audio
Only option is automatically reset to Off.
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Select
Picture
Picture Mode Energy Savings
Brightness 00
Contrast 00
Color 00
Tint 00
Sharpness 00
Advanced Video
Reset Picture Settings
Adjust settings to affect picture quallty
PICTURE
CHANNELS
SETTINGS
PHOTOS
AUDIO
Move
OK
ENTER
MENU
EXIT
Exit
Previous
Select
On
On
Channels
Channel Strength
Auto Zoom
Audio Only
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Play the audio with the picture turned off
PICTURE
CHANNELS
SETTINGS
PHOTOS
AUDIO
NS-24LD100A13_12-0375_MAN_V1_ENG.book Page 25 Wednesday, September 19, 2012 12:46 PM