Filter
Top Products
5
Insignia 24" LCD TV/DVD Combo
www.insigniaproducts.com
4 Remove the stand column.
5 Attach the wall-mount bracket to your TV/DVD
combo using the mounting holes on the back of
your TV/DVD combo. See the instructions that
came with the wall-mount bracket for
information about how to correctly hang your
TV/DVD combo.
TV/DVD combo components
Package contents
• Remote control and batteries (2 AAA)
•Stand
•Quick Setup Guide
• Important Information
Front
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your
TV/DVD combo take type M4 screws.
3.94 in. (100 mm)
3.94 in. (100 mm)
# Item Description
Power indicator
Turns off when your TV/DVD combo is on.
Lights red when your TV/DVD combo is off (standby
mode).
Remote control sensor
Receives signals from the remote control. Do not block.
INPUT
Press to open the INPUT SOURCE list, press CH
or
CH
to select a video input source, then press INPUT
again. For more information, see “Selecting the video
input source” on page 20.
In menu mode, press to confirm selections.
MENU
Press to open the on-screen menu. For more
information, see “Navigating the menus
” on page 21.
CH
/CH
Press to go to the next or previous channel in the
channel list. For more information, see “Selecting a
channel” on page 22.
VOL+/VOL– Press to increase or decrease the volume.
(play/pause)
Press to start or pause disc playback
EJECT Press to eject a disc from the disc slot.
POWER
Press to turn your TV/DVD combo on or off (standby
mode). When your TV/DVD combo is off, power still
flows through it. To completely disconnect power,
unplug the power cord.
EJECT
1
2
5
6
7
3
4
8
9
1
2
3
4
5
6
7
8
9
NS-24LD100A13_12-0375_MAN_V1_ENG.book Page 5 Wednesday, September 19, 2012 12:46 PM