Filter
Top Products
4
NS-24LD100A13 Insignia 24" LCD TV/DVD Combo
www.insigniaproducts.com
Insignia 24" LCD TV/DVD Combo
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-24LD100A13 represents
the state of the art in LCD TV and DVD player design
and is designed for reliable and trouble-free
performance.
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Align the stand with the stand column, then
rotate the stand in the direction of the arrow
until you hear the stand lock into place.
Installing a wall-mount bracket
To attach your TV/DVD combo to a wall-mount
bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 If the stand is attached, press and hold the PUSH
button while you rotate the stand to remove it.
3 Remove the six screws that secure the stand
column to the TV screen.
Notes
• If you plan to wall-mount your TV/DVD combo,
do not install the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Warning
This TV/DVD combo is intended to be supported by a
UL Listed wall mount bracket with suitable
weight/load. (See “Miscellaneous
” on page 48.)
PUSH button
NS-24LD100A13_12-0375_MAN_V1_ENG.book Page 4 Wednesday, September 19, 2012 12:46 PM