Insignia NS-24LD100A13 Flat Panel Television User Manual


 
47
Insignia 24" LCD TV/DVD Combo
www.insigniaproducts.com
Disc playback
USB photo display
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tuner
One or more channels
do not display.
Make sure that the channels are not blocked. See
Setting parental control levels
” on page 31.
Make sure that the channels are not hidden. The
channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add the
channel back to the channel list. See “Hiding
channels” on page 26.
If you are using a cable or satellite box, use the
remote that came with that box to change
channels.
Make sure that you have the correct input
selected to view channels from the cable or
satellite box.
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 28.
Password is lost.
•Enter 9999 to access parental controls, then set
a new password. See “Setting or changing the
password” on page 29.
Some settings cannot be
accessed.
If a setting is grayed, the setting is not available
in the current video input mode.
TV/DVD combo cabinet
creaks.
When the TV/DVD combo is in use, the
temperature rises naturally and may cause the
cabinet to expand or contract which can cause a
creaking noise. This is not a malfunction.
Control buttons do not
work.
Make sure that the Button Lock option is set to
Off. See “Locking control buttons
” on page 30.
Unplug the power cord, wait a few seconds, then
plug the cord back in and turn on your TV/DVD
combo.
TV keeps turning off.
Make sure that the sleep timer is not turned on.
See “Setting the sleep timer
” on page 36.
Problem Solution
Playback does not start.
Make sure that a disc is inserted in the disc slot.
The disc may be dirty. Clean the disc. See
Cleaning discs
” on page 44.
The disc format may not be supported. For more
information, see “DVD player
” on page 48.
No picture.
•Press INPUT and make sure that DVD is selected.
For more information, see “Selecting the video
input source” on page 20.
No sound.
Make sure that headphones are not connected
to your TV/DVD combo. When headphones are
connected the internal speakers are muted.
If your TV is connected to a sound system, make
sure that the volume on the sound system is
turned up.
Picture is distorted
during fast forwarding
or reversing.
This is not a malfunction. When you resume
normal playback the distortion should
disappear.
Some playback features
do not work.
Depending on the disc, some playback features
such as stopping, skipping, or repeat playback
may not work.
The audio language or
subtitle language
cannot be changed.
Not all discs have multiple languages. Check the
disc menu or disc packaging.
No subtitles.
•Press SUBTITLE and make sure that subtitles are
set to on.
Problem Solution
Problem Solution
Photos are not
displayed.
Make sure that your USB flash drive is connected
securely to the USB jack on the back of yourTV.
See “Connecting a USB flash drive
” on page 16.
Press INPUT and make sure that USB (Photos)
is selected. See “Selecting the video input
source” on page20.
Make sure that the photos on the USB flash drive
are JPEG image files with “.jpg” as the file
extension.
Slideshow does not
start.
Make sure that you select slideshow when you
are in thumbnail mode. See “Viewing photos in
a slideshow” on page 40.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your TV/DVD
combo, then turn it on again.
Without stand
22.8 × 3.9 × 15.1 in. (57.9 × 10 × 38.3) cm
10.98 lbs. (4.9 8 kg)
With Stand
22.8 × 7.9 × 16.4 in. (57.9 × 20× 41.7 cm)
11.46 lbs. (5.2 kg)
Screen size measured diagonally 23.6 in.
Display type LCD
Panel 60 Hz vs.120 Hz 60Hz
Display resolution 720p
Panel resolution 1366 (H) × 768 (V)
Aspect ratio 16:9
Contrast ratio (typical)–panel 2000:1
Dynamic contrast ratio–
list value
20,000:1
Brightness (center typical) cd/m2
300 nits
Comb filter 3d y/c digital
Response time 6 ms
Horizontal viewing angle 160
Vertical viewing angle 160
HDMI 1.3 1080p, 1080i, 720p, 480p, 480i
Component video 1080i, 720p, 480p, 480i
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
NS-24LD100A13_12-0375_MAN_V1_ENG.book Page 47 Wednesday, September 19, 2012 12:46 PM