Filter
Top Products
EN 27
Master Page: Right
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps 1 – 6 in “To Print All Still Images
(One Print For Each)” (੬ pg. 26).
2 Press R or T to select
“CURRENT”, and press
MENU. The DPOF screen
appears.
3 Press 3 or 5 to
select the desired file.
4 Press R or T to select the number indication
(00), and press MENU.
5 Select the number of prints
by pressing R to increase
number, or “T” to
decrease the number, and
press MENU.
● Repeat steps 3 through 5
for the desired number
of prints.
● The number of prints can be set up to 15.
● To correct the number of prints, select the
image again and change the number.
6 Press R or T to select
“RETURN”, and press
MENU. The “SAVE?”
appears.
● If you did not change
any settings in step 3
through 5, the Menu
Screen reappears.
7 Press R or T to select “EXECUTE” to save the
setting you have just made, and press MENU.
● To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps 1 – 6 in “To Print All Still Images
(One Print For Each)” (੬ pg. 26).
2 Press R or T to select “RESET”, and press
MENU. The DPOF screen appears.
3 Press R or T to select “EXECUTE”, and press
MENU. The normal playback screen appears.
● To cancel selection, select “RETURN”.
● The number of prints is reset to 0 for all still
images.
You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1 Open the LCD monitor fully.
● Set the Video Output Mode Switch to “LCD
MONITOR”. (੬ pg. 13)
2 Set the Playback Mode Switch to “MEMORY”.
3 Set the Power Switch to “ON” while pressing
down the Lock Button located on the switch.
4 Press MENU. The Menu
Screen appears.
5 Press R or T to select
“FORMAT”, and press
MENU. The FORMAT
screen appears.
6 Press R or T to select
“EXECUTE”, and press
MENU. The memory card
is initialized.
● When initialization is finished, “NO IMAGES
STORED” appears.
● To cancel initialization, select “RETURN”.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
RETURN
SHEETS
DPOF
00
SHEETS
DPOF
05
DPOF
EXECUTE
SAVE?
CANCEL
Initializing A Memory Card
CAUTION:
Do not perform any other operation (such as
turning off the player) during initialization. Also,
be sure to use the provided AC Power Adapter/
Charger, as the memory card may be corrupted if
the battery becomes exhausted during
initialization.
MENU
DISPLAY
END
PROTECT
DELETE
DPOF
NO .RESET
FORMAT
ORMATF
EXECUTE
DATA?EXISTING
ERASE ALL
RETURN
DIGITAL STILL CAMERA (D.S.C.) PLAYBACK
CU-VH1US.book Page 27 Friday, November 28, 2003 8:01 PM