Filter
Top Products
48 EN
Master Page: Left
20. The indicators and the image
color on the LCD monitor are
not clear.
20. •This may occur when the
surface or the edge of the
LCD monitor is pressed.
20.
—
21. The cassette will not load
properly.
21. •The battery’s charge is low. 21. •Install a fully charged battery.
(੬ pg. 11, 12)
22. The memory card cannot be
removed from the player.
22.
—
22. •Push in the memory card a
few more times. (੬ pg. 17)
23. Picture does not appear on the
LCD monitor.
23. •The LCD monitor’s brightness
setting is too dark.
23. •Adjust the brightness of the
LCD monitor. (੬ pg. 14)
24. Images on the LCD monitor
are jittery.
24. •The speaker volume is too
great.
24. •Turn the speaker volume
down. (੬ pg. 18)
25. The LCD monitor has become
dirty (ex. fingerprints).
25.
—
25. •Wipe them gently with soft
cloth. Wiping strongly can
cause damage. (੬ pg. 55)
26. Time code does not appear. 26. •“TIME CODE” is set to
“OFF”.
26. •Set “TIME CODE” to “ON”.
(੬ pg. 28, 31)
27. An error indication (E01, E02
or E06) appears.
27. •A malfunction of some kind
has occurred. In this case the
player’s functions become
unusable.
27. •੬ pg. 51.
28. An error indication (E03 or
E04) appears.
28. •A malfunction of some kind
has occurred. In this case the
player’s functions become
unusable.
28. •੬ pg. 51.
29. The remote control does not
work.
29. •“REMOTE” is set to “OFF”.
•The remote control does not
point at the remote sensor.
•The remote control batteries
are exhausted.
29. •Set “REMOTE” to “ON”.
(੬ pg. 28, 30)
•Point at the remote sensor.
(੬ pg. 39)
•Replace the batteries with
fresh ones. (੬ pg. 39)
TROUBLESHOOTING (cont.)
CU-VH1US.book Page 48 Friday, November 28, 2003 8:01 PM