JVC CU-VH1 DVD Player User Manual


 
EN 43
Master Page: Right-Heading0
SYSTEM CONNECTIONS
[A] Using USB cable
It is possible to do the following things:
Transfer still images stored on a memory card to a
PC.
System Requirements
Windows
®
OS: Windows
®
Me/2000/XP (pre-installed)
Connector: USB connector (standard equipment of
the computer)
•It is not possible to connect to Windows
®
98/98SE
PCs. Use the optional USB reader/writer CU-
VUSD70, the PC card adapter CU-VPSD60 or the
floppy disk adapter CU-VFSD50.
Macintosh
OS:
Mac OS 9.0.4 to 9.2.2
Mac OS X 10.1.5/10.2.1 to 10.2.8/ 10.3.1 to 10.3.2
Connector: USB connector (standard equipment of
the computer)
[B] Using i.LINK cable
It is also possible to transfer still/moving images to a
PC with an i.LINK connector by using the software
equipped with the PC or commercially available
software.
Set “i.LINK OUT” to “SW”. ( pg. 30)
Set the i.Link Output Select Switch on this player to
the appropriate mode (
pg. 35);
“DV”: when using the DV editing software
“MPEG2”: when using the MPEG2 editing software
Set the i.Link Output Select Switch to the appro-
priate mode before connecting the i.Link cable.
NOTES:
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. ( pg. 12)
Never connect the USB cable and the i.LINK
cable simultaneously to the player. Connect only
the cable you wish to use to the player.
Do not connect the player through a hub.
When using an i.LINK cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U
i.LINK cable depending on the type of i.LINK
connector (4 or 6 pins) on the PC.
If the PC connected to the player via the USB
cable is not powered, the player does not enter the
USB mode.
The date/time information cannot be captured into
the PC.
Refer to the instruction manuals of the PC and
Software.
The still images can also be transferred to a PC
with an i.LINK connector-equipped capture board.
The system may not work properly depending on
the PC or capture board you are using.
Connection To A Personal Computer
[A] Using USB cable
To USB
PC
PC with i.LINK
connector
USB cable (provided)
To i.LINK
[B] Using i.LINK cable
To USB connector
To i.LINK
connector
i.LINK cable
(optional)
OR
“USB MODE” and/or “ACCESSING FILES”
appears on the LCD monitor while the PC is
accessing data in the player or the player is
transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.
ADVANCED FEATURES
CU-VH1US.book Page 43 Tuesday, July 6, 2004 6:50 PM