Filter
Top Products
38 EN
Master Page: Left
Still images can be dubbed from a tape to a memory
card.
1 Load a cassette. (੬ pg. 16)
2 Load a memory card. (੬ pg. 17)
3 Set the Playback Mode Switch to “VIDEO”.
4 Set the Power Switch to “ON” while pressing
down the Lock Button located on the switch.
5 Set “ COPY” to “ON”. (੬ pg. 28, 29)
6 Press 4/9 to start playback.
7 At the point you want to dub, press 4/9 again to
engage Still Playback.
8 To dub the image, press SNAP SHOT.
● The “ ” indication appears during
dubbing.
● The selected image is stored in the memory
card.
NOTES:
● If SNAP SHOT is pressed in step 8 when a
memory card is not loaded, the message
“COPYING FAILED” is displayed.
● To use Playback Special effects with a video image
you wish to dub, perform up to step 8 using the
remote control (provided). (੬ pg. 41)
● Images are dubbed in the following image sizes:
Scenes recorded in HD mode: 1280 x 720 pixels
Scenes recorded in SD mode: 848 x 480 pixels
Scenes recorded in DV mode: 640 x 480 pixels
Approximate Number of Storable Images
Dubbing Still Images Recorded On
A Tape To A Memory Card
Power Switch
SNAP SHOT Button
Play/Pause Button (4/9)
Playback Mode
Switch
MENU Button
RT Button
Image Size/Picture
Quality
SD Memory Card
8 MB 16 MB 32 MB 64 MB
640 x 480/FINE 30 68 144 297
640 x 480/
STANDARD
80 178 376 772
848 x 480/FINE 25 55 117 241
848 x 480/
STANDARD
66 148 313 643
1280 x 720/FINE 10 22 48 99
1280 x 720/
STANDARD
26 59 125 257
Image Size/Picture Quality
MultiMediaCard
8 MB 16 MB 32 MB
640 x 480/FINE 36 74 149
640 x 480/STANDARD 95 192 388
848 x 480/FINE 29 60 121
848 x 480/STANDARD 79 160 323
1280 x 720/FINE 12 24 49
1280 x 720/STANDARD 31 64 129
DUBBING (cont.)
CU-VH1US_07Advanced.fm Page 38 Thursday, December 4, 2003 5:37 PM