Filter
Top Products
Masterpage:Right+
EN 23
Filename [MH200SEU_05Name.fm]
SAT CONTROL SET
Page 23 Wednesday, 25 May 2005 13:34
11 Check the result of the test.
If the satellite receiver’s channel number has been changed to
the same one as you set in step 9
Press selection keys to select AYESB, then press ENTER to finish
the Sat Control Set mode.
If the satellite receiver’s channel number has not been
changed correctly
Press selection keys to select ANOB, then press ENTER. Then
perform the procedure again from step 6.
NOTES:
● The Satellite Controller may not work with all types of satellite
receiver.
● For some satellite receivers, you need to set its channel input
mode to 2 digit.
● If your satellite receiver has more than two channel modes, be
sure to set to AAll Channel ModeB. For details, refer to the
instruction manual of the satellite receiver.
● When selecting the satellite receiver’s channel (A step 9),
signals from the remote control may interfere with signals
transmitted from the Satellite Controller. In this case, move the
remote control as close to the unit’s infrared beam receiving
window as possible.
BRAND NAME CODE
JVC
AMSTRAD
ASTON
CANAL SATELLITE
CANAL +
D-BOX
ECHOSTAR (VIA DIGITAL)
FINLUX
FORCE
GALAXIS
GRUNDIG
HIRSCHMANN
HUMAX
ITT NOKIA
JERROLD
KATHREIN
LUXOR
MASCOM
MASPRO
NOKIA
PACE
PANASONIC
PHILIPS
RADIX
RFT
SABA
SAGEM
SALORA
SAMSUNG
SIEMENS
SKYMASTER
TECHNISAT
THOMSON
TPS
TRIAX
WISI
73
60, 61, 62, 63, 92
97
81
81
85
82
68
89
88
64, 65, 102
64, 78, 99
88
68
75
70, 71, 96
68
93
70
87, 94
65, 67, 74, 86, 92, 97
74, 92
66, 84, 101
78
69
97
83, 90
68
83
64
69, 98
66, 100
97
83
91
64
MH200SEU_00.book Page 23 Wednesday, May 25, 2005 1:34 PM