Filter
Top Products
Masterpage:Right+
EN 31
Filename [MH200SEU_06DVD Operation.fm]
BASIC OPERATIONS ON DVD DECK
Page 31Wednesday, 25 May 2005 13:34
Locating The Beginning Of A Desired Selection
You can locate the beginning of a title, chapter, group or track.
During playback or while stopped
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select A9B, then press ENTER.
3 Press selection keys to select the desired item, then press
ENTER.
● Skip this step for Video CD/SVCD and Audio CD.
For DVD-RAM/RW/R, DVD VIDEO
ATITLE SEARCHB or ACHAPTER SEARCHB is selectable.
(However, ACHAPTER SEARCHB is not selectable while stopped.)
For JPEG, MP3
AGROUP SEARCHB or ATRACK SEARCHB is selectable.
(However, ATRACK SEARCHB is not selectable while stopped.)
For Video CD/SVCD, Audio CD
ATRACKB is selectable.
NOTE:
Settings that are selectable during playback and stop mode differ
depending on the type of disc and search used.
4 Press the number keys to enter the desired item number, then
press ENTER.
● Playback starts from the selected section.
Examples:
A To select track 5, press the number key A5B.
B To select track 15, press the number key A1B and A5B.
C To select track 25, press the number key A2B, then A5B.
If you have specified a wrong selection
Press RETURN on the remote control and repeat the above
procedures from step 2.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
● When A7B is displayed on the TV screen in step 4, the chapter
you have selected is not contained in the disc, or chapter search
does not work on the disc.
● Before you press ENTER, playback may start automatically when
you enter the section’s number depending on the disc.
● This function is not possible for a Video CD/SVCD with PBC
function.
Time Search
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a programme
(DVD-RAM, DVD-R, DVD-RW, DVDVIDEO and HDD) or a disc
(Video CD/SVCD and Audio CD).
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select Aj9B, then press ENTER. The
pop-up window appears under the selected item.
3 Press the number keys to enter the time, then press ENTER.
Playback starts from the specified time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
If you have specified a wrong selection,
Press RETURN on the remote control and repeat the above
procedures from step 2.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
● When A7B is displayed on the TV screen in step 3, you have
selected a point that exceeds the recording time of the disc.
● Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases, A7B
is displayed on the TV screen as well.
● This function is not possible for a Video CD/SVCD with PBC
function.
5
DVD-
VIDEO
CHAPTER 99 EACH179:59GROUP 99
TITLE SEARCH
CHAPTER SEARCH
CINEMA
6
ENTER
4
2
0-9
ON SCREEN
RETURN
CLEAR
CANCEL
FGDE
CABLE/SAT
DVDTV
Selection Keys
DVD-
VIDEO
CHAPTER 99 EACH 0:00TITLE 99
CINEMA AUTO
Press 1
Press 2
Press 0Press 5
TIME
TIME
TIME
TIME
TIME
MH200SEU_00.book Page 31 Wednesday, May 25, 2005 1:34 PM