JVC DR-MH200SE DVD Recorder User Manual


 
Masterpage:Right+
EN 59
Filename [MH200SEU_11Editing.fm]
EDITING
Page 59 Wednesday, 25 May 2005 13:34
Manual Dubbing (From HDD To DVD)
It is possible to perform dubbing in the desired transfer rate.
1 Load a recordable disc.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press selection keys to select AHDDNDVDB, then press
ENTER.
4 Press selection keys to select AMANUALB, then press ENTER.
5 Perform step 5 of AHigh Speed Dubbing (From HDD To DVD)B
(A pg. 58). The Manual Dubbing screen appears.
6 Press selection keys to select AREC MODEB, then press
ENTER. Press selection keys to select the desired option,
then press ENTER.
7 Press selection keys to select ACONFIRMB, then press
ENTER.
8 Press selection keys to select AEXECUTEB or AAUTO PWR
OFFB, then press ENTER to start dubbing.
If AAUTO PWR OFFB is selected, the unit will turned off after
dubbing is completed.
NOTES:
In Video mode, if the selected play list includes the scenes
recorded in the different transfer rate, the dubbing is performed in
the highest transfer rate of the scenes in the selected play list.
However, the lower transfer rate cannot be dubbed in the higher
transfer rate.
The recordable time of the disc is displayed on the bar meter. For
details, refer to AAbout Disc Remaining DisplayB (A pg. 59).
During dubbing, it is not possible to play back on HDD or DVD, or
to set timer programming.
Original Dubbing (From DVD To HDD)
It is possible to dub the original recordings on DVD discs to the
HDD deck.
1 Load a disc you want to dub.
2 Press DUBBING to access the Dubbing Menu screen.
3 Press selection keys to select ADVDNHDDB, then press
ENTER.
4 Press selection keys to select indexes (small pictures) of
desired original recordings and/or play lists, then press MARK.
After selecting all indexes you want to dub, press ENTER.
You can select up to 8 original recordings and/or play lists.
5 Press selection keys to select AEXECUTEB or AAUTO PWR
OFFB, then press ENTER to start dubbing.
If AAUTO PWR OFFB is selected, the unit will turned off after
dubbing is completed.
NOTES:
It is not possible to dub play lists on DVD discs.
It is not possible to dub pre-recorded DVDVIDEO discs.
It is not possible to dub Video CDs/SVCDs or Audio CDs.
About Disc Remaining Display
When dubbing from HDD to DVD, the unit displays the time
information for dubbing by bar meter. By comparing the disc
remaining time and the necessary time for dubbing of the selected
items, it is possible to check if the dubbing can be performed
completely or not.
When performing the High Speed Dubbing
When performing the Just Dubbing
The unit displays the status on the assumption that the selected
items are dubbed in the lowest transfer rate.
The total time of a loaded disc is displayed on the right of the bar
meter.
When performing the Manual Dubbing
The unit displays the status on the assumption that the selected
items are dubbed in the lowest transfer rate.
The available highest transfer rate is displayed on the right of the
bar meter.
21%
Capacity of a disc Remaining capacity
Dark green: Length of already recorded item
Light green: Length of selected item
Yellow: Length of the item now being selected by arrow
Red: Excess over the capacity
TOTAL 105MIN
MAX FR240
MH200SEU_00.book Page 59 Wednesday, May 25, 2005 1:34 PM