JVC DR-MH200SE DVD Recorder User Manual


 
Masterpage:Right+
EN 33
Filename [MH200SEU_06DVD Operation.fm]
BASIC OPERATIONS ON DVD DECK
Page 33Wednesday, 25 May 2005 13:34
Programme Playback
You can programme up to 30 tracks (Video CD/SVCD or Audio CD)
to play back in the desired order.
While stopped
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select APRGMB, then press ENTER.
The programme table appears under on-screen bar.
3 Press the number keys
to enter the track
numbers in the desired
order.
Examples:
A To select track 5, press
the number key A5B and
ENTER.
B To select track 15, press
the number key A1B and
A5B.
C To select track 25, press the number key A2B and A5B.
If you have specified a wrong selection
Press CANCEL(L). The last selection is erased.
Or press CLEAR(o). The whole selection is erased.
4 Press I. Playback starts in the programmed order.
When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
To add tracks to the end of the programme, perform steps 1
through 3.
During Programme Playback, pressing T skips to the next
selection of the programme. Pressing S returns to the
beginning of the current selection.
To clear the on-screen bar and the contents of the programme
Press ON SCREEN.
To cancel Programme Playback
Press selection keys to select APRGMB, then press ENTER.
NOTE:
Programme Playback is not possible depending on the type of disc.
Random Playback
You can play back all the tracks on the disc in random order.
While stopped
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select ARNDB, then press ENTER.
Playback starts in random order.
To clear the on-screen bar
Press ON SCREEN.
To cancel Random Playback
Perform steps 1 and 2.
NOTE:
The same track will not be played back more than once during
Random Playback.
Select The Switching Interval Of The Slide Show
You can control the switching interval of the slide show.
1 Press ON SCREEN twice to access the on-screen bar.
2 Press selection keys to select AB, then press ENTER. The
pop-up window appears under the selected item.
3 Press selection keys to select the desired option, then press
ENTER.
Each time you press the selection keys, the interval changes
as follows:
5 SEC. Y 10 SEC. Y 15 SEC. Y 20 SEC. Y 25 SEC. Y
30 SEC. Y (Back to the beginning)
To clear the on-screen bar
Press ON SCREEN.
NOTE:
JPEG files are played back as a slide show. It may take more time
to display an image with larger file size.
VCD
TRACK 99 EACH 0:00
CINEMA
USE [0-9] KEYS TO SELECT TRACK
Program Total Time
VCD
TRACK 99 EACH 0:00
CINEMA
JPEG
TRACK 99GROUP 99
5 SEC.
MH200SEU_00.book Page 33 Wednesday, May 25, 2005 1:34 PM