Filter
Top Products
Masterpage:Right0
EN 45
Filename [MH200SEU_09Timer Recording.fm]
Page 45Wednesday, 25 May 2005 13:34
TIMER RECORDING
You can programme this unit to timer record as many as
16 programmes.
With the S
HOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
HOWVIEW number.
1 Load a recordable disc if recording to DVD.
2 Press PROGRAMME to access the programme top screen.
3 Press selection keys to select ASHOWVIEWB, then press
ENTER.
● When APROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMESB appears on the TV screen, you need to
cancel some of the reserved programmes. (A pg. 48)
4 Press the number keys
to enter the S
HOWVIEW
number of a programme
you wish to record.
OR
Press selection keys to
select the desired
number key on the
screen, then press
ENTER. Repeat to enter
all required numbers.
● If you have made a mistake, press selection keys to select
ADELETEB or ADELETE ALLB, then press ENTER and input the
correct number before you press ENTER again.
5 Press selection keys to select ARECORD TOB, then press
ENTER. Press selection keys to select the desired recording
deck, then press ENTER.
6 Press selection keys to select ACONFIRMB, then press
ENTER.
● If the number you entered is invalid, ASHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRYB appears on the TV
screen. Input a valid S
HOWVIEW number.
● If AGUIDE PROGRAMME IS NOT SET SET GUIDE
PROGRAMME THEN RETRYB appears on the TV screen, set
Guide Programme Numbers manually. (A pg. 73)
7 The SHOWVIEW number you entered and the matching timer
recording information are displayed on the TV screen. Check
the programme data.
● To cancel this setting, press RETURN.
8 Press selection keys to select the desired recording option as
required. Press selection keys to select the desired setting,
then press ENTER.
● AINPUT TITLEB (A pg. 52, AModify Title NameB)
● ACATEGORYB (A pg. 52, AModify CategoryB)
● AVPS/PDCB (A pg. 46, AVPS/PDC RecordingB)
● AWEEKLY/DAILYB (A pg. 46, AWeekly/Daily RecordingB)
● AREC MODEB (A pg. 35, ARecording ModeB)
9 Press selection keys to select AOKB, then press ENTER to
access the Programme Confirmation screen.
10 Press selection keys to select AEXITB, then press ENTER to
complete timer programming.
● To programme another timer, press selection keys to select
ACONTINUEB, then press ENTER.
● If APROGRAMME OVERLAPPEDB appears on the TV screen,
delete or modify the programmes.
NOTES:
● There may be cases that the SHOWVIEW Timer Programming
function prolongs the stop time of the programming.
● When two successive programmes are recorded on a DVD-RW
disc with the S
HOWVIEW Timer Programming function, the
beginning of the second one may be left off the recording.
● If the copy limited programme is received during timer recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
SHOWVIEW Timer Programming
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
PROGRAMME
DISPLAY
0 – 9
VPS/PDC#
RETURN
FGDE
ENTER
CABLE/SAT
DVDTV
Selection Keys
SHOWVIEW NO.
1234
12
456
789
0
3
1
2
3
1
2
2
3
ENTER
SELECT
PROGRAMME
EXIT
PROGRAMME > SHOWVIEW (1/2)
RECORD TO DVD
CONFIRM
DELETE
DELETE ALL
PRESS [PROGRAMME]
TO EXIT
SELECT WITH @
THEN PRESS [ENTER]
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see AS
HOWVIEW System SetupB (A pg. 73) and
set the Guide Programme number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
number will be displayed on the S
HOWVIEW programme screen
in step 7. When this happens, set the correct Guide Programme
number for that station. (A pg. 73, AS
HOWVIEW System SetupB)
Satellite Receiver Users
To timer record a satellite broadcast using the S
HOWVIEW
system:
A Perform ASatellite Receiver Control SettingB (A pg. 22).
B Perform AS
HOWVIEW Timer ProgrammingB (A pg. 45).
C Leave the satellite receiver’s power on.
MH200SEU_00.book Page 45 Wednesday, May 25, 2005 1:34 PM