JVC HM-DT100U VCR User Manual


 
Masterpage:Left-FullCol
34 EN
Filename [HM-100U_Eng_05Index.fm]
PLAYBACK (cont.)
B Viewing still picture
— Still Picture Playback
Press [PAUSE (W)] during normal playback.
The pause indicator [W] on the front display panel lights
up.
Playback is freezed and a still picture appears.
To resume normal playback, press [PLAY (I)].
NOTES:
To obtain a noiseless still picture, it may be necessary to adjust
tracking in slow motion playback before starting still picture
playback.
Manual tracking is possible during still picture playback.
During still picture playback, simply press [CHANNEL +] or
[–] on the VCR (or [TV/VCR CH +] or [–] on the Remote) to
adjust tracking.
C Viewing still picture frame by
frame
— Frame-by-Frame Playback
(S-VHS/VHS only)
1 Pause during playback
Press [PAUSE (W)].
Playback is freezed and a still picture appears.
2 Advance or reverse still picture
To advance a still picture, press [T] or [PAUSE
(W)] repeatedly.
To reverse a still picture, press [S] repeatedly.
To resume normal playback, press [PLAY (I)].
D Viewing slow motion picture
Slow Motion Playback
(S-VHS/VHS only)
During normal playback:
Press [S] to decrease the playback speed.
Each time you press the button, the speed decreases
(toward reverse slow motion playback, then reverse
picture search).
Holding [PAUSE (W)] for more than 2 seconds also
starts forward slow motion playback. If you press
[PAUSE (W)] again, still picture resumes.
To resume normal playback, press [PLAY (I)].
During still picture playback:
Press and hold [T] to start forward (or [S] to start
reverse) slow motion playback. When you release the
button, slow motion playback stops and a still picture
appears.
Holding [PAUSE (W)] for more than 2 seconds also
starts forward slow motion playback. If you press
[PAUSE (W)] again, still picture resumes.
To resume normal playback, press [PLAY (I)].
NOTES:
Manual tracking is possible during slow motion playback.
During slow motion playback, simply press [CHANNEL +] or
[–] on the VCR (or [TV/VCR CH +] or [–] on the Remote) to
adjust tracking.
When the picture jitters vertically during slow motion
playback, press [PAUSE (W)] to enter still picture mode. Then
adjust tracking by pressing [CHANNEL +] or [–].
[TV/VCR
CH+/ ]
C - 2
D
B
C
- 1, 2
D
[PLAY (I)]
VCR
TV
CABLE
/DBS
HM-DH100U_Eng.book Page 34 Thursday, August 5, 2004 1:54 PM