Filter
Top Products
Masterpage:Left-FullCol
52 EN
Filename [HM-100U_Eng_05Index.fm]
TIMER RECORDING (cont.)
B
Changing or deleting Easy Rec Timer
The Easy Rec Timer that has been set can be deleted or
changed to view timer.
1 Access EPG screen
Press [EPG].
2 Select time zone and channel
3 Change or delete record timer
Press [D E] to move the arrow to “Easy View” or
“Delete”, then press [OK].
•When “Easy View” is selected, a mark appears
in front of the program title.
4 Return to normal screen
Press [EPG].
C Easy View Timer
When Easy View Timer has been set, the digital program
that has been timer set will turn on automatically. A
message “VIEW TIMER PROGRAM IS STARTED A
CHANNEL IS CHANGED” will appear on the screen 3
minutes before the start time of the program.
1 Access EPG screen
Press [EPG].
2 Select time zone and channel
Press [
D E
] to select the desired time zone, and
[
FG
] to select the desired channel, then press [OK].
•The detail information of the program will appear.
3 Set view timer
Press [D] to move the arrow to “Easy View”, then
press [OK].
•The timer is set. A mark appears in front of the
program title.
4 Return to normal screen
Press [EPG].
D Changing or deleting Easy View
Timer
The Easy View Timer that has been set can be deleted or
changed to record timer.
1 Access EPG screen
Press [EPG].
2 Select time zone and channel
3 Change or delete view timer
Press [D E] to move the arrow to “Easy Rec” or
“Delete”, then press [OK].
•When “Easy Rec” is selected, an mark appears
in front of the program title.
4 Return to normal screen
Press [EPG].
NOTES:
• If your TV supports only 480i image format, the EPG sub
picture screen will not be displayed even if it is available. As
for TVs with image format of 480p and above, which are
commonly used, the EPG sub picture screen will be displayed.
• EPG will not be displayed when timer recording is in progress.
• You may not be able to set the Rec/View timer unless it
contains detailed data on the EPG. If timer cannot be set using
EPG, set timer manually by performing ‘Digital Timer
Programming’ (
A page 49).
• The View timer is functional only when the VCR is powered
on. In addition, the View timer will not function…
- while playing back a tape.
- while warning message is displayed.
- while the main menu, navigation menu, program menu or
DTV menu is displayed.
• Depending on the broadcast received, the date and time on
the EPG might be incorrect. In this case, the EPG may record
or show a wrong program when using the Easy Rec Timer or
the Easy View Timer.
• When performing recording of a digital channel (ATSC) via
EPG, recording will be in VHS mode with EP as the recording
speed if a VHS tape is inserted.
Press [
D E
] to select
the desired time zone,
and [
FG
] to select the
desired channel, then
press [OK].
•The detail
information of the
program will appear.
Press [D E] to select
the desired time
zone, and [FG] to
select the desired
channel, then press
[OK].
•The detail
information of the
program will appear.
HM-DH100U_Eng.book Page 52 Thursday, August 5, 2004 1:54 PM