Filter
Top Products
12 EN
INITIAL SETTINGS (cont.)
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 00
AUTO CLOCK: ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
Setting clock manually
— Manual Clock Set
First follow steps to on page 10, then go to the
following steps.
Set time
On the front panel:
Press CH5∞ until the
desired time appears,
then press OK.
On the Remote:
Press %fi until the
desired time appears,
then press OK or
#
.
● Holding CH 5∞ or %fi changes the time in
30-minute intervals.
● When the time is entered manually, “AUTO
CLOCK” is automatically set to “OFF”, and
“HOST CH” and “TIME ZONE” disappear.
Set date
On the front panel:
Press CH 5∞ until the desired date appears, then
press OK.
On the Remote:
Press %fi until the desired date appears, then
press OK or
#
.
● Holding CH 5∞ or %fi changes the date in 15-
day intervals.
Set year
On the front panel:
Press CH5∞ until the desired year appears, then
press OK twice.
On the Remote:
Press %fi until the desired year appears, then press
OK or
#
twice.
Select D.S.T. mode
You can select either “ON” or “OFF”.
ON– Adjustment will be made by the built-in
clock itself.
OFF– Select when Daylight Saving Time does
not apply to you.
On the front panel:
Press CH5∞ to select the desired setting.
On the Remote:
Press %fi to select the desired setting.
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or
#
repeatedly until the item you want to
change blinks, then press CH 5∞ or %fi.
–
–
123
456
7
89
0
VCR TV CABLE/DBS
–
–