Filter
Top Products
EN 35
7 Variable-Speed Picture Search:
You can change the speed of picture search.
How to use the TIME SCAN SHUTTLE ring on the front
panel:
Turn the TIME SCAN SHUTTLE ring to the right (forward
search) or to the left (reverse search).
When you release the ring, it remains at the position
where you turn it, and picture search continues. Each
time it passes a click position, the playback speed
changes (see the diagram on the next page.)
How to use the buttons on the Remote:
To do forward picture search, press ¢ repeatedly.
Each time you press the button, the search speed
increases.
● To decrease the speed during forward picture search
(toward normal playback, then reverse picture search),
press 4 repeatedly.
To do reverse picture search, press 4 repeatedly.
Each time you press the button, the search speed
increases during reverse picture search.
● To decrease the speed during reverse picture search
(toward normal playback, then forward picture search),
press ¢ repeatedly.
To resume normal playback, press PLAY ( 3 ).
Viewing still picture
— Still Picture Playback
Press PAUSE ( 8 ) during normal playback.
Playback is freezed and a still picture appears.
● When “TIMESCAN AUDIO” is set to “ON” (default
setting), the sounds of the last 3 seconds are
reproduced repeatedly until you resume the normal
playback or advance (or reverse) the still pictures.
To resume normal playback, press PLAY ( 3 ).
NOTE:
To obtain a noiseless still picture, it may be necessary to adjust
tracking in slow motion playback before starting still picture
playback.
Viewing still picture frame by
frame
— Frame-by-Frame Playback
1 Pause during playback
Press PAUSE ( 8 ).
Playback is freezed and a still picture appears.
● When “TIMESCAN AUDIO” is set to “ON”
(default setting), the sounds of the last 3 seconds
are reproduced repeatedly until you resume the
normal playback or advance (or reverse) the still
pictures.
2 Advance or reverse still picture
On the front panel:
To advance a still picture, press PAUSE ( 8 )
repeatedly.
On the Remote:
To advance a still picture, press ¢ (or PAUSE
( 8 )) repeatedly.
To reverse a still picture, press 4 repeatedly.
● You can also use the JOG dial on the Remote.
However, in this case, the TimeScan function is
not activated.
1 Press JOG/SHUTTLE so that the JOG/
SHUTTLE lamp lights.
2 Turn the JOG dial to the right or to the left.
To resume normal playback, press PLAY ( 3 ).
B
C