Filter
Top Products
38 EN
VCR Plus+
®
Timer
Programing
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
Timer recording allows you to program the VCR to
automatically record a broadcast at some future time.
Up to 8 timer recording programs can be made using
VCR Plus+ timer programing or Express timer
programing method (੬ pg. 42) as far as a year in
advance.
The VCR Plus+ timer programing system eliminates the
need to input channel, date, start and stop time data
when programing timer recording settings. Simply key in
the PlusCode number for the TV broadcast you wish to
record and the VCR’s timer will be automatically
programed. (The PlusCode programing numbers are the
numbers next to the program in most TV listing.)
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it
into the VCR.
● The VCR turns on, and the counter is reset,
automatically.
Access PlusCode No. + screen
Press PROG. on the
Remote.
● The clock must be set
to access the
PlusCode No. screen.
If you have not set the
clock, the Main Menu
screen appears after an error message is
displayed. Refer to page 8 for the Plug & Play
setting or page 10 for the clock setting
procedure.
Enter PlusCode number
Press the appropriate
Number keys to input
the PlusCode number
printed in the TV
listings for the TV
broadcast you wish to
record, then press OK.
Then;
If the Guide Channel Set screen appears
— go to step .
If the VCR Plus+ Program screen appears
— go to step .
● To make corrections, press CANCEL and input
the correct PlusCode number.
TIMER RECORDING
123
456
7
89
0
VCR TV CABLE/DBS
CANCEL
WEEKLY
STOP +/–
DAILY (M-F)
POWER
PLUSCODE NO.
PRESS NUMBER KEY (0–9)
PRESS (+/–) TO SET
EXPRESS PROGRAMMING
PRESS (PROG.) TO END
PLUSCODE NO.
123
PRESS NUMBER KEY (0–9)
THEN (OK)
PRESS (PROG.) TO END