Filter
Top Products
EN 47
Deactivating Video Navigation
If you do not want to store program information, you can
deactivate the Video Navigation function.
1 Access Main Menu screen
Press MENU.
2 Access Video Navigation screen
On the front panel:
Press CH 5∞ to move the
highlight bar (arrow) to
“VIDEO NAVIGATION”,
then press OK.
On the Remote:
Press %fi to move the
highlight bar (arrow) to “VIDEO NAVIGATION”,
then press OK or
#
.
3 Deactivate Video Navigation
On the front panel:
Press CH 5∞ to move the
highlight bar (arrow) to
“NAVIGATION”, then
press OK.
On the Remote:
Press %fi to move the
highlight bar (arrow) to “NAVIGATION”, then press
OK or
#
.
● Each time you press OK or #, Video Navigation
turns “ON” or “OFF”.
4 Return to normal screen
Press MENU.
NOTES:
●
If you press
NAVIGATION
while Video Navigation is
deactivated, “NAVIGATION: OFF” appears (with
“SUPERIMPOSE” set to “ON”:
੬
pg. 56, 57).
●
Video Navigation playback is possible only with the tape
recorded on this VCR.
●
To record the date and time as the program title in this VCR's
memory, make sure the VCR’s clock is set correctly before
recording.
●
To record the program information in this VCR’s memory, you
must record each program for over the minimum recording
time; 5 min for the SP mode and 15 min for EP mode.
●
Video Navigation may not work properly for some tapes.
●
If the VCR finds two tape numbers in one tape while playing
back or searching for the beginning of a program, the tape
will be assigned just one number (smaller number) when you
remove the tape.
●
The program information is stored in this VCR’s memory.
Should the memory in this VCR be damaged and the program
information be lost, it is impossible to restore that
information.
●
After recording a tape on this VCR, write the tape number on
a label and affix the label to the tape in order to allow you to
find the tape by its number.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
REC LEVEL CTL
=
VIDEO NAVIGATION
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
A
VIDEO NAVIGATION
EDIT TITLE
FIND TITLE
FIND BLANK SPACE
CHECK MEMORY
=
NAVIGATION : OFF
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
How to read the Video
Navigation screen
]
0013 FOOTBALL 98 1/ 3
BLANK 1:25 (EP)
10 : 00PM 2/26/99 CH123
11 : 00PM 2/26/99 CH 16
9 : 00PM 2/26/99 CH 56
8 : 15AM 1/15/00 CH 99
9 : 00P=10 : 30P 1 : 30 (SP)
WORLD CUP 98 /SPORTS
PRESS (5,∞), THEN (OK)
PRESS (NAVIGATION) TO END
=
Tape no. and tape title
If there are no tape title, the earliest
recording date will be shown.
Recorded
programs
on this tape
1st page of the recorded
programs on this tape
(only 4 programs can be
shown at a time)
In this case, there are two
more pages.
The detailed program
information currently
selected (start time, end time,
recording length, recording
speed, program title, and
category)
If there are no title and category
entered, “TITLE” and
“CATEGORY” will be shown.
Remaining time on this tape, calculated
based on the current recording speed (SP/
EP) selected on this VCR.
Recording start time,
date and channel no.
of recorded program
The currently selected program whose detailed
information is shown below on the screen.
If the currently selected program and the current tape
position are different while tape is not running, the
current tape position on the tape will be shown by “*”.