Filter
Top Products
15
Installation and Connection
Please read the following carefully when installing this unit.
Minimum Space Required
Precautions for Installation
Installation Environment
This unit is a precision device. Do not install it at the following places. Doing so may cause fire or malfunction of
the unit.
● Where there is water, humidity or dust
● Where the unit may be subjected to oily or cigarette smoke
● On a soft surface such as carpet or cushion
● Where the unit may be subjected to high temperature due to direct sunlight
● When temperature is high or low
Check that it is well ventilated before installing on a rack. When devices that emit heat, such as power amplifiers, are to
be installed on a rack, mount a fan on the rack as well.
Allowable operation temperature range: +5 f to +35 f
Allowable relative humidity range: 20 % to 80 % (no condensation)
Allowable storage temperature range: -10 f to +60 f
● Any room in which there is cigarette smoke or grease
Even where smoke and grease levels are minimal, prolonged exposure will affect this unit and may cause
malfunctioning.
● Do not place this unit in an enclosed area or block the
air inlets and exhaust vents. Allow sufficient space
around this unit for emission of heat.
● Check that it is well ventilated before installing on a
rack.
When devices that emit heat, such as power
amplifiers, are to be installed on a rack, mount a fan on
the rack as well.
100 mm and above
100 mm and above
100 mm and above
30 mm and above 30 mm and above
ENGLISH
LD-HD2KU_E.book Page 15 Thursday, November 17, 2005 4:27 PM