Filter
Top Products
Installation and Connection (continued)
16
Before connection, be sure to turn off both this unit and the device to be connected.
Connecting to Input Devices
● Read the manual that is supplied with the input device to be connected thoroughly.
● See below for an illustration of the devices used and method of connection.
Connecting to a projector
● Read the manual that is supplied with the projector to be connected thoroughly.
● Use the DVI cable supplied with this unit. Use of a split system or optical fiber cable is recommended when using a cable
that is longer than the length of the supplied DVI cable.
● Depending on the capability of the DVI cable used, signals may attenuate or video images may become unstable.
Connecting to Devices
S-VIDEO
VIDEO
Cr/Pr/R
ANALOG INPUTS ANALOG OUTPUTS
Y/Gs Cb/Pb/B C-SYNC RED/Pr GREEN/Y BLUE/Pb H SYNC V SYNC
IR LED
MONITORP ASS-THR U
SCREEN
DVI INPUT
DVI OUTPUT RS-232OPTION RS-232CONTROL
Rear side of this unit
HDD/DVD Recorder
Digital Tuner
Video Deck
Y/Pr/Pb or D Terminal
S-VideoVideoS-Video
Y/Pr/Pb
or
D Terminal
DVI
or
HDMI
RED/Pr GREEN/Y BLUE/Pb H SYNC V SYNCMONITOR
A
SS-THRU
DVI OUTPUT RS-232OPTION RS-232CONTROL
DVI
DVI Connection Cable (Supplied)
Rear side of this unit
LD-HD2KU_E.book Page 16 Thursday, November 17, 2005 4:27 PM