Filter
Top Products
31
oOperation Commands
oSetup Commands
RS-232C Control Commands
Code Range Description
A# (0-2) 0 = 4:3, 1 = Letterbox, 2 = 16:9 Input Aspect Ratio
B# (0-100) 50 (Default value) Brightness
C# (0-100) 50 (Default value) Contrast
D# (0-15) 4 (Default value) Detail
DVI DVI Input
EXT Pass-through Input
FST Report current system status
HELP Display full list of commands
K# (0-100) 50 (Default value) Color
OFF Power OFF
ON Power ON
P# (0- 8) [1- 8 = User, 0 = Factory] Recall profile
PM# (0-1) [0= Normal, 1= Bypass] Advanced Color System
R RGB Input
ST Report current status
STHELP Display Setup menu
STNP# (1-8) Store NTSC profile
STPP# (1-8) Store PAL profile
T# (0-100) 50 (Default value) Tint
V Video Input
X YCrCb Input
Y S-Video Input
Code Range Description
BB# (0-100) 0 (Default value) Bottom Blanking
BL# (0-100) 100 (Default value) Blanking level of bars on video image (black
to white)
BLT# (06-255) LCD Backlight Timer on front panel
BLV# (0 = 0 IRE, 1= 7.5 IRE) Black Level
CR# (0 = 0-255, 1= 16-235) DVI Input Level
CS# (1 = ON, 0= OFF) Composite Sync Signal (RGB Output)
DHS# (0 = NORMAL, 1= WIDE) Horizontal Sync Signal of DVI Input
DVID DVI Input disabled
DVIE DVI Input enabled
E# ( 1= ON, 0= OFF) RS-232C ECHO
EX# (0 = SYNC ON GREEN, 1= COMPOSITE SYNC) RGB Input Sync Signal
EXTD Pass-through Input disabled
EXTE Pass-through Input enabled
HDPROC#
(0 = ENHANCED MODE, 1= HIGH BANDWIDTH MODE)
Output scan rate setting for 1080i signals
HP# (0-50) 39 (Default value) Horizontal Position
IHA# (0-50) 25 (Default value) Adjustment of horizontal position of HD
signals
LB# (0-100) 0 (Default value) Left Blanking
M# (0 = RGB, 1= YPrPb) Output Format
OSDOFF OSD Off
OSDON OSD On
ENGLISH
LD-HD2KU_E.book Page 31 Thursday, November 17, 2005 4:27 PM