Filter
Top Products
17
Control from external device
It is possible to control this unit by connecting a computer to the [RS-232 CONTROL] terminal at the rear of this unit.
Please request a connection cable from us if needed.
For details, please consult your authorized dealer.
Before plugging in the power cord, ensure that all devices have been connected.
RED/Pr GREEN/Y BLUE/Pb H SYNC V SYNCMONITOR
A
SS-THRU
DVI OUTPUT RS-232OPTION RS-232CONTROL
RS-232C Connection Cable (Sold Separately)
(Straight Cable)
Rear side of this unit
Connecting the Power Cord (Supplied)
a Connect the supplied power cord to the [AC INPUT]
terminal of this unit
b Connect the earth wire to the earth terminal
available in the building, followed by inserting the
main plug of the supplied power cord into the
outlet
Power Cord
(Supplied)
b
a
Cautions Against Fire and Electric Shock
● When not using devices, remove the power plug from the wall outlet.
● Do not use power cords for connection other than those supplied.
● Do not use a power voltage different from that which is indicated.
● Do not cut, tear or modify the power cords. Also, do not place a heavy object on, heat or stretch the power cords as this
may cause damage to the cords.
● Do not insert or pull out plugs with a wet hand.
ENGLISH
LD-HD2KU_E.book Page 17 Thursday, November 17, 2005 4:27 PM