Filter
Top Products
27
B Picture Menu
● ABrightnessB, AContrastB, AColorB, ATintB and ADetailB can
also be adjusted outside the OSD menu. Press the
[BRIGHTNESS] button on the remote control, followed by
the number buttons to enter a setting value.
................................................................................................
.
Brightness Button
Adjusts the brightness of the picture image.
● Adjustment is also possible by pressing the
[BRIGHTNESS] button on the remote control. Press the
[BRIGHTNESS] button, followed by the number buttons to
enter a setting value.
................................................................................................
.
Contrast
Adjusts the contrast of the picture image.
................................................................................................
.
Color
Adjusts the color density of the picture image.
................................................................................................
.
Tint
Adjusts the hue of the picture image.
● Adjust this when the colors in the video image do not seem
balanced under the current tint settings.
● This item cannot be adjusted for component (YPrPb)
signals.
................................................................................................
.
Detail
Adjusts the image quality.
● Select your preferred setting values according to the
image to be viewed.
................................................................................................
.
Adv Color (Advanced Color System)
For some DVDs with computer animation or with very
high levels of color, the chroma edge processing circuits
may not be needed and this can be set to
AOFF(Bypass)B. For most sources, the ANormalB setting
should be selected.
Setting Values: 0-100
Default Value: 50
Setting Values: 0-100
Default Value: 50
Setting Values: 0-100
Default Value: 50
Brightness 50
Contrast 50
Color 50
Tint 50
4
Normal
Adv Color
Detail
Input
Picture
Patterns
Display
Setting Values: 0-100
Default Value: 50
Setting Values: 0-15
Default Value: 4
Setting Values: Normal, Bypass
Default Value: Normal
NOTE:
The menus below will not function if ASET: 1080i TO
1080pB is set to AHIGH BANDWIDTH MODEB.
● Aspect
● Tint
● Detail
● Adv Color (Advanced Color System)
● Display
ENGLISH
LD-HD2KU_E.book Page 27 Thursday, November 17, 2005 4:27 PM